配电板(箱)安装要求是：配电板(箱)应用不可燃材料制作；触电危险性小的生产场所和办公室，可安装开启式的配电板；在触电危险性大或作业环境较差的加工车间、铸造、锻造、热处理、锅炉房、木工房等场所，应安装封闭式箱柜；在有导电性粉尘或产生易燃易爆气体的危险作业场所，必须安装密闭式或防爆型的电气设施；配电板(箱)各电气元件、仪表、开关和线路应排列整齐，安装牢固，操作方便。落地安装的板(箱)底面应高出地面5~10 mm；操作手柄中心高度一般为1.2～1.5m；板(箱)前方0.8～1.2m的范围内无障碍物；保护线连接可靠；板(箱)以外不得有裸带电体外露；必须装设在板(箱)外表面或配电板上的电气元件，必须有可靠的屏护。
The installation requirements of distribution board (box) are as follows: the distribution board (box) shall be made of non combustible materials; the production place and office with low risk of electric shock can be installed with open type distribution board; in the processing workshop, casting, forging, heat treatment, boiler room, carpentry room and other places with high risk of electric shock or poor working environment, closed cabinet shall be installed; in the places with conductive dust or producing inflammable and explosive materials Enclosed or explosion-proof electrical facilities must be installed in hazardous gas workplaces; electrical components, instruments, switches and lines of distribution boards (boxes) shall be arranged in order, installed firmly and operated conveniently. The bottom surface of the floor mounted board (box) shall be 5-10 mm higher than the ground; the center height of the operating handle shall be 1.2-1.5 m generally; there shall be no obstacles within the range of 0.8-1.2 m in front of the board (box); the protective wire shall be connected reliably; there shall be no bare electrified body exposed outside the board (box); the electrical components which must be installed on the external surface of the board (box) or the distribution board must have reliable screen protection.